COMPONENTS
PRESSURE WASHER COMPONENTS
1. Spray Gun: Controls the application of water onto
the surface with trigger. Includes trigger lock.
2. Gun Lance: Connects to end of spray gun and
works with pressure nozzles included.
3. Thermal Relief Valve: When water reaches 125
warm water will discharge from pump onto ground
to help prevent internal pump damage.
4. Recoil Starter: Pull to start engine.
5. Oil Dipstick/Filler Neck: Used to check/fill oil.
6. Air Filter
7. Pump: Generates high pressure.
8. Unloader Valve: Controls pressure output.
9. High Pressure Outlet: Connection for high pressure
hose.
10. Water Inlet: Connection for garden hose.
11. Fuel Tank: Fill with regular unleaded fuel. Do not overfill.
12. High Pressure Hose
COMPONENTS
13. Fuel On/Off Switch: Turns fuel supply to the
engine on and off.
14. Choke: Prepares a cold engine for starting.
15. Nozzles: Varying sizes for various high pressure
F
cleaning applications.
o
16. Detergent Tank: Siphons detergent into the low
pressure stream. Automatically turns on when
using black soap nozzle. Only use pressure washer
safe detergent.
17. Oil Drain Plug: Used to drain engine oil.
18. Engine On/Off Switch: Turn switch to the ON
position before using the recoil starter. Turn to the
OFF position to stop the engine.
19. Detergent Hose Connection Barb: Connects
detergent tank to pump.
20. Nozzle Cleaning Tool: Used to clean nozzles.
Westinghouse Outdoor Power Equipment, LLC | 7