Basic Operation - Teac SL-D950 Manuel Du Propriétaire

1 Press the STANDBY/ON button (
the unit on.
< The unit turns on with the source that was last
selected. If the iPod that is in playback mode is
inserted into the dock DS-22, the SL-D950 will
automatically turn on and start playback of the
iPod.
< If you insert the disc in standby mode, the SL-D950
will automatically turn on and start disc playback.
2 Press the FUNCTION button to select a source.
< To listen to an external source connected to the
AUX IN jack, select AUX.
< If you select "iPod" when no iPod is docked, the
iPod indicator on the display blinks.
3 Play the source, and adjust the volume using
the VOLUME knob.
The volume is adjustable from MIN (0) to MAX (40).
Hold down the VOLUME – or + button to turn
down or up the volume continuously.
14

Basic Operation

2 1 3
) to turn
Dimmer
You can change the front panel's display
brightness. Use the DIMMER button to change the
brightness among three levels.
< This function will be cancelled when the
STANDBY/ON button (
Muting
To mute the sound temporarily, press the MUTING
button. Press the MUTING button again to restore
the sound.
< The MUTING indicator lights on the display to
indicate that the muting is engaged.
< If you change the volume or source during the
muting, the muting will be cancelled.
) is pressed.