Teac SL-D950 Manuel Du Propriétaire page 21

MULTI JOG
To check the programmed order
In the stop mode, press the MEMORY button
repeatedly. The track number and programme
number will be shown on the display.
To clear programme
To clear the programmed contents in the stop
mode, press the MEMORY and the stop button (H)
for more than 2 seconds.
< If the power supply is interrupted, the programmed
contents will also be cleared.
MEMORY
To add a track to the end of the
programme
In the stop mode, press the MEMORY button
repeatedly until "00" or "000" appears on the
display. Select a track number using the skip button
(.or/) or the MULTI JOG knob, and then
press the MEMORY button. The track is added to
the end of the programme.
To overwrite the programme
In the stop mode, press the MEMORY button
repeatedly until the programme number to be
changed appears on the display.
Select a new track number using the skip button
(.or/) or the MULTI JOG knob, and then
press the MEMORY button.
21