Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Operating instructions Wiring Duct Cutter
Contents
1.
Introduction
2.
Safety requirements
2.1
General safety requirements
2.2
3.
3.1
3.2
3.3
4.
5.
5.1
5.2
5.3
6.
6.1
6.2
Mode of operation: Cutting
6.3
7.
7.1
7.2
8.
Thanks for your decision to purchase a Wiring duct cutter. The installation manual will provide a detailed description on how to operate the equipment
safely.
Please treat this document with care and make sure that it is read, understood and followed by all operating personnel.
2 Safety requirements
2.1 General Safety requirements
Machinery with moving parts always bears the risk of bodily injury and requires specific caution and carefulness.
To minimize the risk, please read this manual carefully before operating this equipment.
•
this equipment may only be operated in faultless condition
•
variations have to be reported to the supervisor immediately
•
the work environment has to be tidy
•
the work place has to be well illuminated
•
operating personnel is required to wear proper safety apparel (safety glasses)
•
work at the machine is prohibited if concentration could be affected (e.g. through drugs or alcohol)
•
keep away children
The equipment is not designed and intended for any other work than described in this manual. In the case of misapplication,
we will not be reliable for any resulting damages.
Wiring duct cutter 2677-0100-01-00
Drawing: for the cutting of duct and covers
7
Publicité
Chapitres
Table des Matières
