Cutter Blade Exchange; Counter-Cutter Blade Exchange; Troubleshooting And Service; Service Hotline - hawa 2677 Mode D'emploi

Operating instructions Wiring Duct Cutter
7.1 Cutter blade exchange (fig. 8)
To replace or sharpen the cutter blades disassembly is made as follows:
• Unscrew counter-nut with wrench size 24 (1)
• Release cutter allen screws (2)
• Screw out axis with wrench size 30 (3)
• Extract cutter blade with hand lever to the top
Attention: Make sure cutter blades do not bind when mounting the axis (3)!
Fig. 8
7.2 Counter-cutter blade exchange (fig. 9)
The counter-cutter blade can be exchanged easily by removing the 3 mounting screws, without having to disassemble the cutter.
Tighten the screws after exchange.
Fig. 9

8. Troubleshooting and service

If you experience a break-down of the equipment please contact your local sales office or the manufacturer.

Service Hotline:

Tel: 770 9213272
Fax: 770 9212896
E-Mail: haewa@haewacorp.com
12
3xM6