Brush Replacement - sunjoe SJSW26M Manuel D'utilisation

Brush Replacement

1. Before replacing the brush, remove the hopper bag from
the sweeper, and flip the sweeper over.
2. Remove all the nuts and bolts on the brush retainers used
for securing the brushes (Fig. 16).
Fig. 16
Old
brush
Old
brush
3. Remove the old brushes, the long brush retainer, and the
short brush retainer from the sweeper (Fig. 17).
Fig. 17
Old brush
Old brush
Bolts
Bolts
Long brush
retainer
Short
brush
retainers
4. Insert new brushes between the long brush retainer and
the short brush retainer; fix with M6 nuts and hex bolts
(Fig. 18).
Fig. 18
Short brush
retainer
Hex bolt
Hex bolt
Short brush
retainer
5. Fit the brush assembly onto the brush shaft; fix with a M5
nut and a M5 bolt (Fig. 19).
Fig. 19
M5 nut
6. Repeat the steps to install the remaining brush.
8
Brush
M6 nut
Long brush retainer
M6 nut
Brush
SIDE VIEW
Rotation
direction
Brush shaft
Hex bolt
SIDE VIEW