Building-In; Building-In / Dimensioned Drawings - Electrolux IK2065RE Mode D'emploi

This appliance complies with the following E.E.C.
Directives:
-87/308 EEC of 2/6/87 relative to radio inter-
feren- ce suppression.
-73/23 EEC of 19.2.73 (Low Voltage Directive)
and subsequent modifications.
-89/336 EEC of 3.5.89 (Electromagnetic
Compatibility Directive) and subsequent modi-
fications.
Attention!
It must be possible to disconnect the appliance from the
mains power supply; the plug must therefore be easily
accessible after installation.

Building-in

Dimensioned drawings
See "Installation Instructions" supplied.
Please check whether, after installing your appliance and
especially after rehingeing the door, the door seal seals
right round. An untight door seal may lead to heavy frost-
ing and thereby to a higher power consumption.
Warning!
If the ambient temperature is cold (i.e. in Winter),
the gasket may not fit perfectly to the cabinet. In that case,
wait for the natural fitting of the gasket or accelerate this
process by heating up the part involved with a nor-
mal hairdrier.
22