Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
CLEANING AND MAINTENANCE
The appliance does not require any special
maintenance.
Regularly clean the ventilation slots.
TECHNICAL DATA
Mains
V
voltage
Mains
Hz
frequency
Idling
V
voltage
Welding
A
current
Max.
absorbed
A
current
Fuse
A
current
Weight
kg
Weighted root mean square acceleration according
to relevant standard. : < 2.5 m/s ²
The declared vibration total value has
been measured in accordance with a standard
test method and may be used for comparing one
tool with another that the declared vibration total
value may also be used in a preliminary
assessment of exposure.
A warning that the vibration emission
during actual use of the power tool can differ
from the declared total value depending on the
ways in which the tool is used and of the need to
identify safety measures to protect the operator
that are based on an estimation of exposure in
the actual conditions of use (taking account of
all parts of the operating cycle such as the times
when the tool is switched off and when it is
running idle in addition to the trigger time).
BPSMIG140
230
50
39
60-140
27
-
32.4
SERVICE DEPARTMENT
_ Damaged switches must be replaced by our after-
sales service department.
_ If replacing the power cord is necessary, it
should be done by the manufacturer or his agent
to avoid a hazard.
STORAGE
_ Thoroughly clean the whole machine and its
accessories.
_ Store it out of the reach of children, in a stable and
secure position, in a cool and dry place, avoid too
high and too low temperatures.
_ Protect it from exposure to direct sunlight. Keep it
in the dark, if possible.
_ Don't keep it in plastic bags to avoid humidity
build-up.
GUARANTEE
Refer to the enclosed guarantee conditions
for the terms and conditions of guarantee.
ENVIRONMENT
Should your machine need
extended use, do not put it in
the domestic waste but
environmentally safe way.
replacement after
dispose of it in an
2013
Publicité
Table des Matières
