Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
3. The operator should not be inside the loop
formed by the welding circuit - Place the electrode
holder/torch cable and the current return cable on
the same side of the operator.
4. The operator should not be near the power
source during welding/cutting operations
Electromagnetic fields can affect the operation
of active implants (pacemakers). Active implant
carriers should consult their doctors before
doing any welding/cutting work.
Some TIG welding and PLASMA cutting power
sources use remote "HF" striking systems that
can damage electronic equipment in the vicinity
of the welding/cutting operation.
Before any welding/cutting operation decide to
use a contact striking system, or place all
sensitive equipment well away from the area.
WARNING: Packaging materials
are not toys! Children must not
play with plastic bags! Danger of
In this manual and/or on the machine the following
symbols are used:
suffocation!
Denotes risk of personal
injury or damage to the
tool.
Read manual before use
Always wear hearing
protection
Always wear safety
goggles
Always wear protective
gloves
Always wear a dust
mask.
In accordance with
essential applicable
safety standards of
European directives
Double insulated
Keep bystanders away
ADDITIONAL SAFETY INSTRUCTIONS
FOR WELDERS
Use this machine only for its purpose, as designated
in this manual: bow welding with electrodes.
Unproper use of this machine may cause harm to
people, animals or property.
The user is responsible for his own safety as well as
the safety of people in his surrounding.
§ Repair should only be done by
authorized/qualified personnel.
§ Only the provided/included welding cables must
be used (Ø10mm² section rubber cable)
§ Maintenance must be done on a regular bases.
§ While working, keep the welder free from all
debris, do not put it against a wall, so
ventilation is guaranteed at all times.
§ Pull socket from mains before moving the welder.
§ Check condition of welding cables, electrode
clamp, earth clamp regularly. Damaged insulation
can cause harm and can diminish quality of welding.
§ Bow welding produces sparks, melted metal
particles and smoke. So be very cautious
and remove all combustible fluids/materials from
your working area.
§ Make sure air supply is sufficient.
§ Never weld bottles, barrels or tubes that contained
inflammable liquids or gasses. Avoid every contact
with the welding current circuit: the no-load voltage
that may occur between the electrode clamp and
the earth clamp may be dangerous.
§ Never store or use the welder in a moist
environment or in the rain.
§ Protect your eyes with appropriate safety goggles
(DIN degree 9-10) that you put in the enclosed
safety cap. Wear gloves and dry protective clothing,
free of oil and grease, to protect your skin from UV
light.
Remove the plug from
the sector
Risk of electric shock.
Take appropriate
measures for
the protection of face
and body.
Harmful gases.
Risk of fire and
explosion.
Publicité
Table des Matières
