Limits Of Use - Build Worker BPSMIG140 Traduction Des Instructions D'origine

WELDER
BPSMIG140
Congratulations on buying your new BUILD
WORKER MIG Welder. With this welding unit you
can now experience manu advantages of the MIG
welding process, This welder will enable you to
obtain a professional finish in welding car bodywork,
and many other thin steel welding processes for
which this machine is ideal.
WARNING! Read this manual and
general safety instructions
carefully before using the
appliance, for your own safety.
Your power tool should only be
passed on together with these
CONFORMITY LIMIT
BUILD WORKER thanks you for your confidence in
purchasing this arc welding/cutting equipment. The
equipment will give you complete satisfaction
provided you follow:
1. the operating and maintenance instructions and
2. the important safety and environmental
information hereafter This arc welding/cutting
equipment has been built in strict conformity with
the following standards:
1. European Directive 2004/108/EC
(Electromagnetic Compatibility) and
2. European Directive 2006/95/EC (Low
Voltage)(LVD) by application of the respective
harmonised standards
3. EN 60974-1 (Arc welding equipment – Part 1:
Welding current sources) and
4. EN 60974-10 (Arc welding equipment – Part 10:
Electromagnetic Compatibility (ECM) requirements.
BUILD WORKER accepts no responsibility in the
event of modification, addition of components or
sub-units or any conversion of the arc
welding/cutting equipment, carried out by the
customer or a third party, without prior written
agreement from BUILD WORKER . Electromagnetic
emissions from electrical equipment are mainly
caused by radiation from the installation wiring. In
the event of a problem of proximity between
electrical appliances,
you should contact BUILD WORKER who will
be pleased to examine individual situations. When
associated with other equipment, arc welding/cutting
equipment may constitute a machine within the
meaning of European Directive 2006/42/EC
(Machines). This machine must satisfy
the essential requirements of the European
Directive. BUILD WORKER cannot accept
responsibility for combinations of equipment not
defined by them.
GB
instructions.
WELDER

LIMITS OF USE

For your safety, BUILD WORKER
recommendations and obligations,
a large number of which figure in
It is essential to read the following safety pages
before
switching on the arc welding/cutting equipment:
Safety against smoke, vapours,
Safety against electromagnetic
provides the following
non-exhaustive list of
national laws.
Electrical safety
and noxious and toxic gases
Safety against light radiation
Safety against noise
Fire safety
Safety when using gas
Personnel safety
fields