English (Original Instructions) - DeWalt DCF887 Notice D'instruction

EnGLIsh
BRUSHLESS CORDLESS COMPACT IMPACT DRIVER
DCF887
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.
Technical Data
Voltage
Type
Battery type
Power output
No load speed
Mode 1
Mode 2
Mode 3
Impact rate
Max torque
Tool holder
Weight (without battery pack)
Noise values and vibration values (triax vector sum) according to EN60745-2-2:
L (emission sound pressure level)
PA
L (sound power level)
WA
K (uncertainty for the given sound level)
Vibration emission value a =
h
Uncertainty K =
The vibration emission level given in this information sheet has
been measured in accordance with a standardised test given in
EN60745 and may be used to compare one tool with another. It
may be used for a preliminary assessment of exposure.

WARNING: The declared vibration emission level
represents the main applications of the tool. However if
the tool is used for different applications, with different
accessories or poorly maintained, the vibration emission
may differ. This may significantly increase the exposure
level over the total working period.
An estimation of the level of exposure to vibration should
also take into account the times when the tool is switched
off or when it is running but not actually doing the job.
This may significantly reduce the exposure level over the
total working period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool
and the accessories, keep the hands warm, organisation
of work patterns.
24
EC-Declaration of Conformity
Machinery Directive
WALT one of the
e
Brushless Cordless Compact Impact Driver
DCF887
DCF887
V 18
D
DC
1/10/20 Technical Data are in compliance with:
2006/42/EC, EN60745-1:2009+A11:2010, EN60745-2-2:2010.
Li-Ion
These products also comply with Directive 2014/30/EU and
W 400
2011/65/EU. For more information, please contact D
rpm
the following address or refer to the back of the manual.
0–1000
The undersigned is responsible for compilation of the technical
0–2800
file and makes this declaration on behalf of D
0–3250
ipm 0–3800
Nm 205
mm 6.35
Markus Rompel
Director Engineering
kg 0.9
D
D-65510, Idstein, Germany
31.05.2017
dB(A) 96
dB(A) 107
dB(A) 3
Definitions: Safety Guidelines
m/s 2 22.0
The definitions below describe the level of severity for each
m/s 2 2.1
signal word. Please read the manual and pay attention to
these symbols.





General Power Tool Safety Warnings

WALT declares that these products described under
e
WALT, Richard-Klinger-Straße 11,
e
WARNING: To reduce the risk of injury, read the
instruction manual.
DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
serious injury.
WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or
serious injury.
CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderate injury.
NOTICE: Indicates a practice not related to
personal injury which, if not avoided, may result in
property damage.
Denotes risk of electric shock.
Denotes risk of fire.
WARNING: Read all safety warnings and all
instructions. Failure to follow the warnings and
WALT at
e
WALT.
e