Niko 05-205 Mode D'emploi page 106

05-205
press to return to the previous menu.
if desired, you can add other buttons in this Zone, e.g. volume lower. repeat the above-
mentioned procedure for this audio function.
Remark: 1 button can be linked to several audio functions, e.g. by pressing a button one
time, you can select source 1 in Zone 1 and at the same time switch off Zone 2. simply
apply the above-mentioned procedure
Using the logic inputs
The audio-link is provided with 6 logic inputs. By means of a voltage free contact, all
audio functions can be applied. The contacts are connected between the terminal com-
mon (c) and one of the 6 inputs. The programming happens in the exact same way as
the configuration of a push-button (add buttons).
however, keep in mind that the audio function can be configured when switching off a
contact as well as when opening one.
Practical example of programming with a voltage free contact
You want to switch on zone 3 and select source 1 when switching off a contact.
connect the contact between terminal 1 (or another free logic input) and C.
Select 'ADD BUTTONS' in the Setup menu:
[ ADD BUTTONS ]
Clear buttons
GB
106