Using Powerbot; Turning The Power On/Off / Selecting - Samsung POWERbot SR2AK9350W Serie Manuel

Using poWerbot

you must turn on the emergency switch on the bottom of the unit before using poWerbot.
turning the power on/off
press the
3 seconds
button for more than
ENGLISH-14
• When POWERbot is not used for
30 minutes, it will return to the charger
WARNING
to charge itself automatically.
Starting auto clean mode
Press and release this button. The POWERbot
moves and cleans all set places until the battery is
depleted.
✻ ✻ Stop cleaning: Press and release the
Using Spot clean mode
The POWERbot cleans a localized area intensely.
recharging/energy-saving
mode
fRecharging
You can command POWERbot to recharge at the
docking station automatically while it is cleaning
by pressing this button.
fEnergy-saving mode
Refer to page 17.
button