Using Powerbot; Turning The Power On/Off / Selecting - Samsung POWERbot SR1AM7010U Serie Guide D'utilisation

Using POWERbot

You must turn on the emergency switch on the bottom of the unit before using POWERbot.
Turning the power on/off
Press the
• When POWERbot is not used for 30 min.;
SR1AM70**U* / SR2AM70**U* series: Enters energy-saving mode.
WARNING
SR1AM70**W* / SR2AM70**W* series: Automatically returns to the docking station to
Recharging/Energy-saving mode
fRecharging
You can command POWERbot to recharge at the docking station
automatically while it is cleaning by pressing this button.
fEnergy-saving mode
Refer to page 17.
button for more than 3 seconds
be charged.
Starting Auto clean mode
Press and release this button. The POWERbot moves
and automatically cleans the set areas only once.
✻ ✻ Stop cleaning: Press and release the
Using Spot clean mode
The POWERbot cleans a localized area intensely.
ENGLISH-14
button