dB Technologies ES-1203 Caractéristiques Techniques page 47

English
B. You can change the digital steering of the tops by
selecting and pressing [5] after you have confirmed
a MONO or DOUBLE COLUMN STEREO configuration,
choosing from:
• UP (upwards)
• FAR (no angle)
• DOWN (downwards)
Press [5] again to confirm your chosen option
(e.g. figure 3)
While choosing the configuration,
left and right arrows appear
under the system diagram.
While choosing the steering,
up and down arrows appear
under the system diagram.
C. Select and confirm MAIN LEVEL (figure 4) to increase
or decrease the overall ES1203 system volume.
D. Select and confirm the desired input to access the
corresponding sub page. The available inputs are:
• CH1
• CH2
• CH3
• BLUETOOTH®
The CH2 and CH3 inputs are initially set as a
single stereo channel (L+R). Once you have
accessed the sub page, you can use them as
two separate mono channels by selecting the
input type.
The table below shows the adjustable parameters for
inputs CH1, CH2 and CH3:
NAME
GAIN
LEVEL
TYPE
EQ
AUX
PAN
ES-1203
PARAMETER
INPUT GAIN
OUTPUT LEVEL (SENT TO THE INTERNAL MIXER)
INPUT TYPE
FILTERS THAT CAN BE APPLIED TO MICROPHONE, INSTRUMENT OR LINE
INPUTS
AUXILIARY SEND MIXER (NOT AVAILABLE IN THE DOUBLE COLUMN
CONFIGURATION)
PANNING EFFECT (NOT AVAILABLE IN THE MONO CONFIGURATION)
Figure 3
Figure 4
Figure 5
Figure 6
RANGE
[0, 10, 20] dB
-∞ ÷ 3 dB
CH1: MIC/INST - CH2,
CH3:MIC/LINE
SEE THE TABLE ON
PAG. 48
-∞ ÷ 3 dB
SEE: INPUT, OUTPUT AND AUX
MIXERS PARAGRAPH
L ÷ R
Cod. 420120253 REV. 1.0
47