First Switch-On; Connecting The Tops To The Subwoofer - dB Technologies ES-1203 Caractéristiques Techniques

3. FIRST SWITCH-ON

CONNECTING THE TOPS TO THE SUBWOOFER

MONO CONFIGURATION
When using a MONO configuration,
mount the two heads as described in
the related paragraph and then you
only need one connection from the
subwoofer to one of the two tops:
• Insert the double
the telescopic pole
previously on the subwoofer (it
makes no difference whether you
choose hole [X] or the other one)
• Use the 2.5
provided.
• Connect the bottom connector
on the double top as shown
• Connect it to
connector [9] on
• Use the clips provided to secure
the cable to the telescopic pole
STEREO CONFIGURATION
When using a STEREO configuration:
• Insert each top onto its own
pole (e.g. using the SK 36 TT kit)
• Use the two 7
provided.
• Connect each top
• Connect the left cable connector
[9] and the
connector [10] to the subwoofer.
• Use the clips provided to secure
the cables to the telescopic poles
ES-1203
42
top onto
mounted
m cable
the MONO
the sub
m cables
as shown
right cable
English
Cod. 420120253 REV. 1.0