Installing The Main Battery - Psion Teklogix NETBOOK PRO Guide De Démarrage Rapide

Infrared Port
Figure 2.4 Rear Of NETBOOK PRO
Main Battery Cover
Figure 2.5 Left Side Of NETBOOK PRO
6 Psion Teklogix NETBOOK PRO Quick Start Guide
USB Connector
CF Card Slot
USB- RS232
CF Eject Button
USB-RS232 Connector

2.6 Installing The Main Battery

Fitting The Battery
Before you can use the NETBOOK PRO you must fit the bat-
tery. Slide it into place until it clicks, as shown in Figure 2.6.
Important: The NETBOOK PRO will warn you when its
main battery is getting low. The backup
battery is designed to maintain the memory for
several hours.
Changing Battery Packs
If you are using your NETBOOK PRO away from the
charger and a spare battery pack is available, you can change
batteries when the battery warning is displayed. To do this:
1. Switch the NETBOOK PRO off.
2. Slide the battery pack latch towards the rear of the
NETBOOK PRO.
3. Pull the battery away from the NETBOOK PRO to
remove it.
4. Push in the replacement battery pack.
Figure 2.6 Installing The Battery Pack
Important: Always switch off the NETBOOK PRO before
removing the main battery.