Weekly Program: Examples - eQ-3 C Classic Mode D'emploi

ching interval.
• Confirm with OK.
Set the temperature that is to be
•
maintained from 0:00 onwards (ex-
ample shows 17.0°C).
Confirm with OK.
•
The next switching time appears on
•
the display (example shows 6:00). Use the setting wheel
to set the time.
Confirm with OK.
•
• Then, select a temperature for the selected switching
time.
• Keep repeating this process until you have finished storing
temperatures for the period from 0:00 to 23:59.
After all 7 switching times have been selected, 23:59 will
•
appear on the display as end time.
Confirm with OK.
•
In Auto mode, the temperature can be modified at any time
via the setting wheel. The modified temperature will then
be retained until the next program changeover.
The energy-saving controller allows you to store up to 3 heat-
ing periods (7 switching times) with individual temperature
settings for each day of the week. The factory setting consists
of two heating phases (from 6:00 until 9:00 and from 17:00 until
23:00 respectively) for every single day of the week:
From 00:00 to 06:00 17.0°C
From 06:00 to 09:00 21.0°C
From 09:00 to 17:00 17.0°C
From 17:00 to 23:00 21.0°C
From 23:00 to 23:59 17.0°C
24

2. Weekly program: Examples