Briteq POWERMATRIX5x5-RGB Mk2 Mode D'emploi page 7

ENGLISH
RIGGING WITH INCLUDED U-BRACKET:
 The included U-bracket can be used to place the projector on the floor and point it in a desired direction. In
this case a proper and stable base should be added!
 The included U-bracket can also be used to hang the projector in truss and point it in the desired direction:
 Fix 2 suitable truss clamps to the holes in the U-bracket. Make sure that both clamps are firmly
fixed to the bracket!
 Fix 1 or 2 suitable safety cable(s) to the safety eyes (16) to make sure the projector cannot drop more
than 20cm if the U-bracket or clamps fail.
 Point the projector in the desired direction.
IMPORTANT: with the included bracket you CANNOT fix more than one projector. In case you want to
hang an array of POWERMATRIX5x5-RGB you MUST use our special heavy duty hanging bracket
(order code: 4407)
RIGGING WITH OPTIONAL HANGING BRACKET:
An optional heavy duty hanging bracket (order code: 4407) is available for users that want to hang bigger
arrays:
 Remove the standard U-bracket from the projector, you don't need it.
 On top of the hanging bracket there are 2 elongated openings that can receive M12 bolts. Fix 2 suitable
truss clamps here. You can slide both clamps over a length of 14cm to make sure that you never have
problems fixing to the truss. Make sure that both clamps are firmly fixed to the bracket!
 Put the hanging bracket on top of the projector with the opening for the "Allen key"
facing the back of the projector. And make sure it fits perfectly.
 Insert a proper "Allen key" size-8 in the hole on the hanging bracket. (Note: a T-
handle Allen Key is the best choice)
 Turn the Allen key in counterclockwise direction to firmly attach the hanging
bracket to the projector: make sure you feel a "click" and cannot turn the
"coffin lock" system anymore!
Allen Key
REMARK: if you cannot lock the bracket as described, please check if the coffin
lock is in the correct position. See pictures: if the locking pin is in the position as
shown on the left, you should turn the Allen Key in clock-wise direction until the
pin is in the position as shown on the right.
 Fix 2 suitable safety cables to the safety eyes (16) to make sure the projector
cannot drop more than 20cm if the bracket or clamps fail.
Attention: You can add a maximum of 4 horizontal rows to make the array.
Vertically you can fix as much columns together as you like.
BRITEQ
®
5/80 POWERMATRIX5x5-RGB Mk2
OPERATION MANUAL