Hendi 975336 Mode D'emploi page 4

1.1. IDENTIFICATION OF THE "INSTRUCTION HANDBOOK"
The Instruction Handbook is a document issued by
the Manufacturing Company and is an integral part
of the machine. This document is adequately identi-
fi ed for easy tracing and/or subsequent references.
1.2. AIM OF THE DOCUMENT
This handbook contains the information necessary to the customer and assigned personnel for the correct
installation, use and maintenance of the machine at good conditions and maximum safety.
1.3. SAFETY PRECAUTIONS AND MANUFACTURER'S RESPONSIBILITY LIMITS
All operator-machine interaction relating to the in-
tended use of the machine and its overall life cycle
has been carefully and thoroughly analysed during
the design phase and the drafting of the Instruction
handbook.
It is nevertheless understood that experience, ade-
quate training and "common sense" of the person-
nel operating on the machine are of primary impor-
EN
tance.
These requirements are therefore considered indis-
pensable during all machine operating phases and
consultation of this handbook.
1.4. REFERENCE TO STANDARDS
This document is draw up in accordance with following indications:
• Attachment "I" of Machine Directive 89/392/CEE and subsequent issues: point 1.7.4;
• UNI EN 292/2 – 1992, point 5.5
Model
Voltage
Serial number
Date
Techniques coordinator
4
All rights relating to the reproduction and disclosure
of the information contained in this handbook and
the documentation quoted and/or attached are re-
served.
The non-observance of safety precautions or spe-
cifi c warnings indicated in this handbook, improper
use of all part of the supply, the use of unauthorized
spare parts, use of the machine by unauthorized
personnel, violate all safety standards regarding
supply design, construction and intended use of the
machine and relieve the manufacturer from every
liability in case of damage to persons or property.
The Manufacturing Company is therefore in no way
responsible for the non-observance by the user of
the safety precautions listed in this handbook.
HENDI 975336
230 V, 50 Hz