Bowers & Wilkins P9 Signature Headphones Mode D'emploi page 5

5. Cleaning your P9 Signature
Headphones
Clean your P9 Signature Headphones by soaking
a soft cloth in warm water and dabbing the leather
until clean. Do not rub the cloth on the leather. Do
not use cleaning detergents or leather polish as
doing so may cause damage to the product.
6. Trouble shooting
No or intermittent audio
• Make sure that the headphone plug is securely
connected to the device's headphone socket
(not a 'line out' socket).
• Make sure that the headphone plug connection
is not obstructed by any protective case used
on the device.
• Try an alternative audio source.
• Use the supplied universal cable if iPod, iPhone
or iPad microphone and control features are
not required.
Remote and mic not functioning correctly
• Check the iPod, iPhone and iPad compatibility.
• Disconnect and re-connect the headphones to
ensure the connection is secure.
• Test on another compatible product if available.
Low volume or poor audio quality
• Ensure the headphones are securely connected.
• Disable any audio enhancement features on the
audio source.
• Make sure the volume level of the audio source is
turned up.
• Try an alternative audio source.
• Check the cable connection within the
left earpiece.
Sound is only coming from one earpiece
• Disconnect and re-connect the headphones
to ensure the connection is secure.
• Try another audio source.
• Check the cable connection within the
left earpiece.
5