Alarm - Albrecht Audio DR 463 Manuel D'utilisation

• Set time format display as 12 Hour or 24 Hour (default). Only for manual setup required.
• Set date format in the positions of YY (year), MM (month) and DD (day) – YY/MM/DD, (default)
or MM/DD/YY.
• Turn on/off (default) the Daylight Saving Time (DST).Available only on manual setup
With a wireless network connected, GMT (+00:00) time is a time reference of time setting. Add or
deduce the hour according to your time zone when you set the time.

12.5. Alarm

You can choose between 2 regular alarms ( You can choose between 2 regular alarms (Alarm 1 and Alarm 2) or the NAP Alarm in this menu.
on the remote control to enter the menu directly.
Press
To set Alarm 1 or Alarm 2, press
on specifi c days of the week, e.g. Monday to Friday). Next choose the desired alarm source: Beep
tone, Melody, Internet Radio, FM Radio or DAB/DAB+ Radio. Afterwards you can leave the settings tone, Melody, Internet Radio, FM Radio or DAB/DAB+ Radio. Afterwards you can leave the settings
by pressing or ◄.
At the time of the alarm the radio connects to the Internet if the set network is available. Therefore
there may be some delay before the radio starts playing your station. If no network connection is
established within one minute, the alarm will change automatically to Melody.
If the NAP alarm is activated, it alarms once after 5/10/20/30/60/90/120 minutes depending on
which one you have set.
You may choose Alarm Volume to confi gure the volume of the alarms. During the alarm the volume
will increase automatically up the set value (Crescendo function).
When the alarm(s) is/are set, there will be a clock icon at the top of the display. The clock icon with
alarm time will also be displayed on the standby screen.
During alarm, press any key to enter snooze mode. It will alarm again in 5 minutes. Press the
key to stop the alarm.
and turn it on. Now choose the frequency (daily, once or
English 47