Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Designed test conditions
Power line voltage, frequency
Power consumption
Altitude
Temperature range
Humidity
Installation category
Pollution degree
Dimensions / Weight
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to both Part 15 of the FCC Rules and the radio
interference regulations of the Canadian Department of Communications. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
115 V or 230 V, admissible fluctuations –20% +15%, 50/60 Hz
140 mA or 70 mA
4000 m
0...40 °C
Max. relative humidity 80% for temperatures to max. 31 °C, linear decreasing to 50% at 40 °C
II
2
W x D x H = 157 x 210 x 85 mm / net 1.5 kg (incl. paper roll)
9
Publicité
Table des Matières
