R-net
7
Locking the controller
The control system can be locked in one of
two ways. Either using a button sequence on
the keypad or with a physical key. How the
control system is locked depends on how the
wheelchair manufacturer has programmed the
system.
7.1 Keypad Locking
To lock the wheelchair using the keypad;
While the control system is switched on,
depress and hold the on/off button.
After 1 second the control system will beep.
Now release the on/off button
system beeps.
control system beeps.
beep.
The wheelchair is now locked.
To unlock the wheelchair using the keypad;
If the control system has switched off, press
the on/off button.
system beeps.
control system beeps.
beep.
The wheelchair is now unlocked.
7.2 Key Locking (optional)
To lock the controller with the special key (H1 in
following screen will be displayed.
If the control system has switched off, press
Locking the controller
33
15