Honda Power Products HHB25 Manuel De L'utilisateur page 64

NOTE:
• Normally use the blower with the hot air tube installed, or it can
cause icing.
• When the ambient temperature is 10°C (50°F) or above, be sure to
remove the hot air tube in the following procedure before operation.
Operating the blower with the hot air tube installed can cause
overheat of the engine.
HOT AIR TUBE REMOVAL
1. Remover the air cleaner cover (see page 24).
2. Pull out the hot air tube from the hot air duct.
3. Pushing the locking tabs of the hot air joint, move the hot air joint to
the inner side to remove.
4. Store the hot air tube and hot air duct in an adequate place securely
not to lose them.
LOCKING TABS
HOT AIR JOINT
5. Reinstall the air cleaner cover.
HOT AIR TUBE
61