Engine Oil Change - Honda Power Products HHB25 Manuel De L'utilisateur

Engine oil change

CAUTION: If the engine has been running, the engine, muffler and the
engine oil are very hot and they remain hot for a while after stopping
the engine. To protect you from burn, wait until they cool down
before starting the oil change.
NOTE: Drain the oil while the engine is still warm to assure rapid and
complete draining.
1. Check the fuel tank cap is tightened.
2. Remove the oil filler cap and drain the oil into the oil container by
tipping the engine toward the oil filler neck.
3. Refill with the recommended oil (see page 20) and check the oil
level (see page 19).
4. Install the oil filler cap.
ENGINE OIL CAPACITY: 0.08 L (0.08 US qt, 0.07 Imp qt)
Wash your hands with soap and water after handling used oil.
38