Throttle Cable Inspection And Adjustment - Honda Power Products HHB25 Manuel De L'utilisateur

Throttle cable inspection and adjustment

Check the throttle cable free play and adjust if necessary.
<Adjustment>
1. Insert a rod or equivalent material under the handle. Raise the
handy blower off the ground by lifting the rod up.
NOTE:
The handle of this handy blower features the vibration-proof
structure. Adjust the throttle cable free play by lifting the handle up, or
the engine speed can increase when holding the handle.
2. Loosen the flange bolt of the throttle cable guide. Adjust the throttle
cable free play by pushing the guide in the direction shown with the
arrow. Adjust the free play so that it is 2 to 3 mm at the tip of the
throttle lever.
FLANGE
BOLT
44
THROTTLE
CABLE GUIDE
HANDY BLOWER
THROTTLE LEVER
FREE PLAY:
2 to 3 mm