Publicité
Graupner
Building instructions for the YAK 55 Gernot Bruckmann Design, Order No. 9524
The model
This is a model of the Yak 55 M aerobatic monoplane. The full-size machine was powered by
a Vedeneyev M-14P 360 BHP (269 kW) 9-cylinder radial engine, and was used for aerobatic
competitions and display flying. The model is intended as an indoor aerobatic aircraft, and
offers an outstanding performance in that role. The injection-moulded brace support and
CFRP wing and fuselage braces help to produce a lightweight airframe which has very good
torsional and bending strength. All the slots for the carbon fibre braces are laser-cut as
standard. The model has a low all-up weight even with standard components, and is simple
to build thanks to accurate laser-cutting. The model was designed by Gernot Bruckmann and
has been flown successfully in several competitions:
WAG (World Air Games) qualification, Prague: 1
qualification, Poing: 1
TOC, Toledo / USA: 5
Specification
Wingspan approx.
Overall length approx.
Wing area approx.
Wing loading approx.
All-up weight, according to fittings
Manufacturer's declaration from Graupner GmbH & Co. KG
Content of the manufacturer's declaration
If material defects or manufacturing faults should arise in a product distributed by us in the
Federal Republic of Germany and purchased by a consumer (§ 13 BGB), we, Graupner
GmbH & Co. KG, D-73230 Kirchheim/Teck, Germany, acknowledge the obligation to correct
those defects within the limitations described below.
The consumer is not entitled to exploit this manufacturer's declaration if the failure in the
usability of the product is due to natural wear, use under competition conditions, incompetent
or improper use (including incorrect installation) or external influences.
This manufacturer's declaration does not affect the consumer's legal or contractual rights
regarding defects arising from the purchase contract between the consumer and the vendor
(dealer).
Extent of the guarantee
If a claim is made under guarantee, we undertake at our discretion to repair or replace the
defective goods. We will not consider supplementary claims, especially for reimbursement of
costs relating to the defect (e.g. installation / removal costs) and compensation for
consequent damages unless they are allowed by statute. This does not affect claims based
on legal regulations, especially according to product liability law.
Guarantee requirements
The purchaser is required to make the guarantee claim in writing, and must enclose original
proof of purchase (e.g. invoice, receipt, delivery note) and this guarantee card. He must send
the defective goods to us at his own cost, using the following address:
GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY
Keine Haftung für Druckfehler. Technische Änderungen vorbehalten!
st
place; German Indoor Championships, Roedinghausen: 3
th
place, WAG qualification, Turin: 1
st
place; German Championships
st
place.
900 mm
949 mm
25.96 dm²
6.5 g / dm²
170 g
ID# 0060046
rd
place; E-
20
01/2009
Publicité
