Télécharger Imprimer la page

Slackers ZIP-LINE KIT Mode D'emploi page 6

La tyrolienne avec frein de ressor

Publicité

Les langues disponibles

Les langues disponibles

CORRECT CABLE WRAP - TEAR DROP
U-Clamp Distance
1 1/2 times tree Diameter
Course end
of cable
on bottom
4. MANDATORY TESTING
When your course setup is complete, before rider takes the first ride, you MUST perform 2 important tests.
A - Load Stress Test
B - Course Speed Test
STRESS TEST REQUIRED -
This product should be tested
using 250 lbs (113 kg) at 5 ft.
(152 cm) from each end at the
start and finish points.
b4 Adventure 4010 Holly Street Unit 16 • Denver Colorado 80216 • 1-844-834-4334 QUESTIONS?
TREE/
POLE
U-shape
thread
U-Clamp
Washer
Thread cover
cap
WARNING! ADULT
Info@Rip-Line.com · www.b4adventure.com - DC:080818
Example: Tree Diameter = 14 In., closest U-Clamp
after final tightening should be 21 In. from the tree
Third installed
Second installed
U-Clamp
U-Clamp
3 In. between bolts
Place thread cover caps on each exposed thread
Figure 3
WARNING! ADULT
SPEED TEST REQUIRED -
The zipline course speed
should be tested using a 250
Lbs (113 Kg) weight hung from
the trolley to check course
speed.
INCORRECT - TOO TIGHT!
TREE/
POLE
First installed
U-Clamp
6

Publicité

loading

Ce manuel est également adapté pour:

Zipline sla.513 - 70'Zipline