FLAT OR LEVEL COURSE ATTACHMENT HEIGHT GUIDELINE
General Set Up: Start point Height for Course (space between trees)
Course Length:
100 Ft.
Initial setting:
132 In.
(from ground)
*This table is meant to aid set up, showing minimum heights. Adjustments for rider height and weight as well as terrain
variations should be taken into consideration. At no time should the trolley hit the U-clamps at the finish point when testing. If
so, lower the start point attachment height and retest.
ACCELERATING
>>>>
Do not add additional slope to the cable! It will not improve the ride and may create a danger to the rider.
SLOPING COURSE ADJUSTMENT ATTACHMENT HEIGHT GUIDELINE
If the course is sloping downhill, you need to measure how much to drop in inches at ground level it is from your
Start Point compared to Finish Point and then subtract that from your starting point height. For example: Your
course is 80 Ft., and you estimate the ground level drop is 24 In., you would need to set your Start Point height at
96 In. (120 In. less 24 In.). See chart for the maximum you can REDUCE your Start Point height. (NEVER HAVE
YOUR START POINT LESS THAN 78 IN. FROM THE GROUND).
FLAT OR LEVEL COURSE ATTACHMENT HEIGHT GUIDELINE
General Set Up: Start point Height for Course (space between trees)
Course Length:
100 Ft.
Initial Set Up
Start Point (In.):
132 In.
Maximum Slope
Height Reduction: 54 in.
*Every course is different, examine the course clearances so the riders feet do not drag near the end of the course
b4 Adventure 4010 Holly Street Unit 16 • Denver Colorado 80216 • 1-844-834-4334 QUESTIONS?
90 Ft.
80 Ft.
126 In.
120 In.
Note how the line sags/dips
as the rider goes down the
course, slowing them down.
PEAK SPEED
>>>>
START TO SLOW
90 Ft.
80 Ft.
126 In.
120 In.
48 In.
42 In.
Info@Rip-Line.com · www.b4adventure.com - DC:080818
70 Ft.
60 Ft.
50 Ft.
114 In. 108 Ft.
102 In. 96 In.
>>>>
SLOW TO A STOP<<<<ROLL BACKWARDS
70 Ft.
60 Ft.
50 Ft.
114 In. 108 In.
102 In. 96 In.
36 In.
30 In.
24 In.
40 Ft.
30 Ft. End Point
90 In.
78 In.
TROLLEY SHOULD NOT
HIT FINISH POINT CLAMPS
Finish Point
Height - 78"
40 Ft.
30 Ft. End Point
90 In.
78 In.
18 In.
12 In.
4