Ce Declaration Of Conformity; Marcellan - FAAC 550 Mode D'emploi

IMPORTANT NOTES FOR INSTALLER
1. DESCRIPTION (Fig. 1)
2. TECHNICAL SPECIFICATIONS
3. ELECTRICAL INSTALLATION LAYOUT(standard system Fig. 3)
4. INSTALLING THE AUTOMATION SYSTEM
4.1. PRELIMINARY CHECKS
4.2. POSITIONING TELESCOPIC ARMS
4.3. POSITIONING OPERATOR/BACK PLATE
4.4. ASSEMBLY SEQUENCE
4.5. ADJUSTING THE COUNTERWEIGHTS
5. MOUNTING GEARED MOTOR UNIT
6. START-UP
6.1. CONNECTING ELECTRONIC CARD
6.2. CHECKING DIRECTION OF ROTATION
6.3. ADJUSTMENT OF LIMIT SWITCHES (OPTIONAL)
6.4. MOUNTING COVER
7. TESTING THE AUTOMATION SYSTEM
8. MANUAL OPERATION
9. RETURNING TO NORMAL OPERATION
10. MAINTENANCE
11. REPAIRS
Manufacturer: FAAC S.p.A.
Address: Via Calari, 10 - 40069 - Zola Predosa - Bologna - ITALY
Declares that: Operator mod. 550
• is built to be integrated into a machine or to be assembled with other machinery to create a machine under the provisions of Directive
2006/42/EEC;
• conforms to the essential safety requirements of the following EEC directives:
• 2006/95/EC Low Voltage directive.
• 2004/108/EC Electromagnetic Compatibility directive.
• and also declares that it is prohibited to put into service the machinery until the machine in which it will be integrated or of which it will
become a component has been identified and declared as conforming to the conditions of Directive 2006/42/EEC and subsequent
modifications.
Bologna, December 30, 2009
Read this installation manual to the full before you begin installing the product.
The symbol indicates notes that are important for the safety of persons and for the good condition of the automated system.
The symbol

CE DECLARATION OF CONFORMITY

Notes on reading the instruction
draws your attention to the notes on the characteristics and operation of the product.
INDEX
Managing Director
A. Marcellan
550 Page 5
Guide for the installer
page.6
page.6
page.6
page.6
page.6
page.6
page.6
page.6
page.7
page.7
page.7
page.7
page.7
page.7
page.7
page.7
page.7
page.7
page.8
page.8
page.8