Solar Panel Connection - EcoFlow RIVER Pro Mode D'emploi

Solar Panel Connection

How to recharge the RIVER Pro using solar panels?
If you need to know more about the connection of solar panel, please refer to the Solar Panel User Guide.
Here we focus on demonstrate how to connect RIVER Pro to 1 set of solar panel or connect RIVER Pro to 2 sets
of solar panels in parallel. The RIVER Pro can support a 10-25V DC input. When the input exceeds 25V, the RIV-
ER Pro's overvoltage protection will be triggered. Overvoltage may damage the product. Users should follow
these instructions. EcoFlow DO NOT provide free repair services for any product damage caused by connecting
too many solar panels to the product or incorrect connection, even during the warranty period.
1. Recommend Charging Method
Users can connect a solar panel (do not connect more than one in series) as shown in Example 1. Connect the
solar panel to the MC4 to XT60 Solar Charging Cable. Connect the XT60 connector to the RIVER Pro's XT60
input to charge the RIVER Pro. Users can connect up to 2 sets of solar panels in parallel to the MC4 port as
shown in Example 2. If you want to connect 2 sets of solar panels, And connect the MC4 parallel connection ca-
ble to the MC4 to XT60 Solar Charging Cable. Then connect them with our solar MC4 parallel connection cable.
Connect the XT60 connector to the RIVER Pro's XT60 input to charge the RIVER Pro. The parallel connection
cable is an optional accessory that is sold separately.
e.g.1
RIVER Pro Charging Port
XT60 Connector
e.g.2(Only supports parallel connection, NOT serial connection)
RIVER Pro Charging Port
XT60 Connector
MC4 Connector
RIVER Pro
RIVER Pro
Solar MC4 parallel connection cable
* The solar panels and related parallel connec-
tion accessories are sold separately.
SOLAR PANEL-21.6V X2
SOLAR PANEL-21.6V
8