ProBreeze PB-F16-UK Mode D'emploi page 4

ASSEMBLY
Base
1. The fan base comes in two semi-circular
parts. First, slot the two parts together to
form the circular base (FIG 1).
2. Lead the power chord through the small
indentation on the base of your fan.
3. Turn your fan upside down on a secure, flat
surface. Ensure there is sufficient space
around you.
4. Align the holes on the base with the screw
holes on the bottom of your fan. It should
fit snuggly in place.
5. Secure tightly with the four screws
provided.
Cable Hook
To install the cable hook, simply slot it into the
back of the fan.
5 | English
1
3
4 & 5
2
OPERATING INSTRUCTIONS
Note: the buttons on the control panel mirror
the buttons on the remote control.
• On/Off: press once on your control panel
or remote to turn your fan on or off. The
temperature of the room will display in the
led display panel.
• Fan Speed: to turn the fan speed up or
down, either press the fan speed button
on the remote or on the control panel.
The speed indicator on the led display will
change to reflect the setting.
• Oscillation: press once on your remote
or control panel to start or stop fan
oscillation.
• Modes: press the mode button on your
remote or on the control panel to set one
of three modes. When a mode is active, it
will illuminate on the led display.
• Fan Mode: the fan power will remain
steady in one of the three speed settings.
Natural Mode: natural mode is designed
•
to mimic the natural flow of wind and
will transition from high speed (for five
seconds), to mid speed (for five seconds),
to low speed (for five seconds). This cycle
will repeat.
Night Mode: night mode slowly reduces
•
the fan speed until it turns off to save
energy as you sleep. Once activated, the
fan speed will function on high speed for
30 minutes, and will then reduce to mid
speed for 30 minutes and low speed for
30 minutes before switching off.
Child Mode: child mode quickly reduces
•
the fan speed until it turns off to save
energy. Once activated a timer will be set
for 3 hours. The fan speed will function
on high speed for 15 minutes, and will
then reduce to mid speed for 15 minutes
before running on low speed for the
remainder of the 3 hour timer. After 3
hours have passed, the fan will turn off.
Timer: you can set your fan to turn off
•
automatically in 1 hour increments from
1-12 hours. To do this press the timer
button on your remote or control panel
until the correct time displays on the led
display. To turn this mode off, continue
pressing the timer button until the led
display reverts back to the temperature.
English | 6