Ezviz C3A+W2D Guide Rapide page 9

Step 3 Power on the Base Station
- Wait until the LED indicator turns to solid blue.
Step 4 Connect Base Station to Internet via Network Cable
- Connect the base station to the LAN interface of your router with the network cable.
Make sure network indicator is on or flashing.
Step 5 Synchronize Base Station with Camera(s)
• Make sure the camera is within 2' to 3' (0.6 m to 1 m) of the base station.
• The synchronization process lasts about 2 minutes.
1. Press the Main Button on the base station. The circular LED indicator flashes Blue.
5V 2A
4