Explanation Of Display And Symbols - Mark OptiTherm Livret Technique

4.2 Explanation of display and symbols.

A
B
C
D
E
OptiTherm
06 29 191
Display
A - Shows the measured room temperature.
B - Displays the desired room temperature.
Displays the mode of operation (DAY, NIGHT, ECO, FROST PROTECTION)
C Indicates which functional mode is switched on (HEATING, VENTILATION),
-
if there is a heating request and of the Message
connected) is active.
D
- Reason for the mode of operation.
(clock switch, overtime timer or exception day)
E - Shows the actual date and time
Symbols
F - Heating mode switched on symbol
G - Heating request symbol
H - Ventilator switched on symbol
I or II indicates if the ventilator is in high or low position (if applicable).
I
- Message OFF (clip 1 and 2 on equipment disconnected)
J
- Clock switch active symbol
K
- overtime timer active symbol
(running time indicates when this function will be switched off again)
L - Exception day active symbol
M - Day temperature symbol (factory setting 18 °C)
N - Night temperature symbol (factory setting 15 °C)
O - Eco temperature symbol (factory setting 8 °C)
P - Frost protection symbol (factory setting 5 °C)
1 2.0
18.0 °C
08:00
00:15
01-03-2011
F M
G N
H O
I P
J
K 01:00
L
⦻
(clip 1 and 2 on the air heater dis-
EN
9