User Menu: Change Temperature Setting; User Menu: Set/Change Clock Program - Mark OptiTherm Livret Technique

5.2 User menu: change the temperature setting
To change the temperature setting you follow the images below.
back to main screen
ESC
User Menu
Temperature
Clock Program
Special day
Settings
select
• In the user menu select the menu-item temperature and then push the OK push-button.
• With the  and  button, select the mode of operation which you wish to change and con-
firm this with the OK button.
• The display jumps to the temperature setting of the chosen mode of operation. With
the  and  button, change the temperature setting and confirm this with the OK button.
Follow the steps above to change the other temperature settings.
When you are finished with changing the temperature settings:
• After the last change you press the OK button to confirm this.
• Then you push the ESC button to go back to the user menu again.
5.3 User menu: change/set the clock program
To adjust the existing clock program or to enter new times:
• You select the menu item clock program and then you push the OK button.
• Now change the existing clock program or input a new clock program following the images
below.
back to main screen
ESC
User Menu
Temperature
Clock Program
Special day
Settings
select
• Now with the  and  button, you select the menu-item program and then push the OK but-
ton
• With the  and  button, select a new or existing program block (1 to 20) and then push the
OK button.
• Now with the  and  button, you select Day and then push the OK button
• Now with the  and  button, you change to the desired days and then push the OK button
again.
(12345, 1234567, 1, 2, 3, 4, 5, 6, 7, 67, 2345 or off).
1=Monday, 2=Tuesday, 3=Wednesday, ......, 6=Saturday, 7=Sunday
• Now with the  and  button, you select the switch time program and then push the OK
button
• now with the  and  button you change the hours and minutes from the start and end times,
in that order. Confirm each entry with the OK button after which the display goes automati-
cally to the following entry. After you confirm the last entry you automatically go back to the
menu-item clock program
12
ESC
Temperature
Day 18,0 °C
Eco 15,0 °C
Night 8,0 °C
OK Frost 5.0 °C
select
ESC
Clock Program
Program 1
Date 12345
Interval 08:00 >> 17:00
OK Switch to Day
select
ESC
Temperature
Day 18,0 °C
Eco 15,0 °C
Night 8,0 °C
OK Frost 5.0 °C
modify
ESC
Clock Program
Program 1
Date 12345
Interval 08:00 >> 17:00
OK Switch to Day
modify