User Menu: Set/Change Exception Day - Mark OptiTherm Livret Technique

• Now with the  and  button, you select switch to and then push the OK button.
• Now with the  and  button you change the desired mode of operation (DAY, NIGHT,
ECO) and then push the OK button.
Repeat the above to input a new clock program or another change.
When you are finished with changing the clock program:
• You push the ESC button to go back to the user menu again.
5.4 User menu: change/set exception day
Exception days can be used to allow the OptiTherm to switch to another mode of operation on
a certain date. After the exception day has passed then it automatically disappears from the pro-
gram and it is again available for the entry of a new one. You have 20 program blocks available for
input.
To program or to change an exception day:
• With the  and  button, you select the menu-item exception day and then push the OK
button
Now change the existing exception days or input new exception days following the images below.
back to main screen
ESC
User Menu
Temperature
Clock Program
Special day
Settings
select
• With the  and  button, you select program and then push the OK button
• Chose a new or existing program block (1 to 20). And confirm this with the OK button.
• Now with the  and  button, select the desired date and confirm this with the OK button.
Change the date or enter a new date (day-month-year) by changing the day, month and year, in
that order with the  and  button. Confirm each entry with the OK button after which the
display goes automatically to the following entry. After you have changed the year, the display
will automatically go to the time settings.
• Now with the  and  button select the switch time and with the  and  button change
the hours and minutes of the start and end time, in that order. Confirm each entry with the
OK button after which the display goes automatically to the following entry. After you confirm
the last entry you automatically go back to the menu-item Switch time
• Now with  and  button select switch to and change the desired mode of operation in
DAY, NIGHT or ECO.
• Confirm this by then pushing the OK button again
• Repeat the above to enter a new exception day or to change an existing one.
• Push the ESC button to go back to the main display.
ESC
Special day
Program 1
Date Off
Interval ___:___ >> ___:___
Switch to ___
OK
select
ESC
Special day
Program 1
Date Off
Interval ___:___ >> ___:___
Switch to ___
OK
modify
EN
13