Samsung 4 Serie Manuel D'utilisation page 7

6. Auto Tuning (Step 1): Selecting how you watch your TV
• I use an aerial cable.: Memorises all of the available channels using RF cable.
• I use a cable or satellite service.: You don't need to use Auto Tuning to find channels.
7. Auto Tuning (Step 2): Selecting a search options
Select the desired broadcasting signal and antenna source. Press the ▲/▼/◄/► button, then press the ENTERE button.
When setting the antenna source to Cable, a step appears allowing you to assign numerical values (channel frequencies) to the
channels. For more information, refer to Channel → Auto Tuning.
✎
Press the ENTERE button at any time to interrupt the memorisation process.
8. Clock: Setting the Clock Mode
• Auto: Set the current time automatically.
• Manual: Allows you to manually set the current date and time.
9. Setup Complete
Press the ENTERE button.
✎
The completed settings are displayed.
If You Want to Reset This Feature...
→ System) again at home although you did in shop.
You should do Setup (MENU
Select System - Setup (Initial Setup). Enter your 4 digit PIN number. The default PIN number is "0-0-0-0" (except Italy). If you want to
change the PIN number, use the Change PIN function.
✎
If you forget the PIN code, press the remote control buttons in the following sequence in Standby mode, which resets the PIN to
"0-0-0-0" (Italy: "1-1-1-1"):
(off) → → 8 → 2 → 4 →
POWER MUTE
English - 7
POWER (on).