Initial Setup - Samsung 4 Serie Manuel D'utilisation

When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the POWERP
button. Setup is available only when the source is set to TV.
1. Menu Language: Selecting a menu language
Press the ▲ or ▼ button, then press the ENTERE button. Select the desired OSD (On Screen Display) language.
2. Use Mode: Selecting Store Demo or Home Use
Press the ▲ or ▼ button, then press the ENTERE button.
Select the Home Use mode. Store Demo mode is for retail environments.
✎
When pressing TV controller, the function menu screen appears. Select the Menu(m) and press it more than 5 seconds
using the controller. The Store Demo mode is set.
✎
Cancel the Store Demo by selecting Source(
✎
Store Demo is only for shop display. If you select it, several functions are not able to use. Please select Home Use when you
watch at home.
3. Network Settings: Configure network settings.
✎
If you select the Skip button, you have to set network in the Network Settings respectively. For more information, refer to
"Connecting to the Network" in the e-Manual.
1 Connect LAN Cable or Samsung Wireless LAN Adaptor. Select the Next button, then press the ENTERE button.
2 Complete the network settings in accordance with your desired way.
4. Software Upgrade: Upgrading the software to latest version
When checking software version if there is a brand-new version, upgrade the software to latest version by pressing Upgrade Now.
✎
Press Upgrade Later to upgrade later. For more information, refer to "Software Upgrade" in the e-Manual.
✎
You can only upgrade software when the Network Settings is successfully completed.
5. Country (Depending on the country): Selecting a country
Press the ▲ or ▼ button, then press the ENTERE button.
Select the appropriate country.
✎
After selecting the country in the country menu, some models may proceed with an additional option to setup the pin number.

Initial Setup

) and pressing it more than 5 seconds.
English - 6