Preset Temperature - Mitsubishi Electric CITY MULTI PAR-CT01MAU-SB Manuel D'utilisation

Preset temperature

<Cool, Drying, Heat, and Auto (single set point)>
<Auto (dual set point) or Setback mode>
1
Preset
temperature
for cooling
Preset
temperature
for heating
Press the
Operation mode
temperature, and press the
•
Refer to the table on page 20 for the settable
Room temperature
temperature range for different operation modes.
(Refer to the
•
Preset temperature range cannot be set for Fan/
Installation Manual.)
Ventilation operation.
•
Preset temperature will be displayed either in Centigrade
in 0.5- or 1-degree increments, or in Fahrenheit,
depending on the indoor unit model and the display mode
setting on the remote controller.
The current preset temperatures will appear.
Each pressing of the
preset temperatures for cooling and heating.
button to decrease the preset
▼
▲
or button switches the
◀ ▶
button to increase.
19