Resetting The Connection; Controlling The Hood Via The Cooktop; Overview Of The Hood Control Settings - Bosch NIT8660SUC Manuel D'utilisation

en-us Cooktop-based hood control
8.3 Resetting the connection
If you have problems connecting your appliance to your
home network (Wi-Fi) or if you want to log your appliance
onto a different home network (Wi-Fi) , you can reset the
Home Connect™ settings.
Note: If you reset the Home Connect™ settings, the con-
nection to any hood will also be terminated.
Turn on the cooktop.
1.
Press and hold kitchen timer for 4 seconds.
2.
a The product information is displayed.
Press kitchen timer repeatedly until
3.
played alternately.
Set the settings value to
4.
8.4 Controlling the hood via the cooktop
In the basic settings menu, you can configure what the
hood should do when the cooktop or individual cooking
zones are switched on or off.
You can select other settings using the control panel.
Setting the fan
Touch hood control.
1.
Select the fan level.
2.
8.5 Overview of the hood control settings
You can adjust the cooktop based hood controls to suit your requirements at any time.
Note: The settings will only be displayed if the appliance is connected to a hood. Some of these settings may not be avail-
able.
Setting Values
- Not connected
¡
- Start connection process
¡
- Connected to home network
¡
(Wi-Fi)
- Connected to hood
¡
- Deactivated
¡
The hood must be switched on
manually, if required.
- Switched on in automatic
¡
mode. 1
In automatic mode, the hood
switches itself on when one of
the cooking zones is switched
on.
- Switched on in manual
¡
mode.
The hood switches itself on at
the default level when one of the
cooking zones is switched on.
- Deactivated
¡
The fan switches off when the
cooktop is turned off.
- Switched on in automatic
¡
mode 1
- Switched on with standard
¡
delayd shut-off
- No change to the settings
¡
1 Factory setting (may vary according to model)
22
and are dis-
in the settings area.
Description
1 /disconnect Connection between cooktop and hood
Automatic fan switch-on
The display shows this setting only when the appliance has been con-
nected to the hood.
Delay shut-off
Setting for whether/how the fan is to run on after the cooktop is turned
off.
The display shows this setting only when the appliance has been con-
nected to the hood.
You can choose between the levels 1, 2 and 3. To se-
lect the levels Boost and PowerBoost, press 4 or 5 in
the settings area, or press speed boost repeatedly until
the required intensive level is set.
Turning off the fan
Touch kitchen timer.
1.
Select fan setting ⁠ .
2.
Setting automatic mode
Touch hood control repeatedly until
▶
a Depending on the configuration of the hood sensor, the
fan will start automatically when steam is produced. Re-
fer to the operating instructions of your hood.
Deactivating automatic mode
Touch hood control repeatedly until
▶
lect a different fan setting.
Setting the hood lighting
You can switch the hood light on and off via the control
panel of the cooktop.
Press hood light.
▶
Note: Depending on the basic settings you have selected,
the light will automatically be switched on or off when the
cooktop is switched on or off.
lights up.
goes out or Se-