CLAS AC 5247 Mode D'emploi page 41

AC 5247
READER DEFAULT CODE OBDII
1) Select [Read Codes] and press [ENTER] in Diagnostic Menu. If there are some codes, the
screen will display the codes as shown below:
Use the SCROLL button to select a module and press the ENTER button to confi rm.
Note: There is navigation bar in red to show the position for chosen item. also show X/X at
the top right corner to remind the user.
2 - Use the SCROLL button to select Stored Codes or Pending Codes from the Read Codes
menu and press the ENTER button.
If there is not any Diagnostic Trouble Code, the display indicates "No (pending) codes are
stored in the module!" Wait a few seconds or press any key to return to previous screen.
NOTE: Permanent Codes function is available for merely vehicles supporting the CAN
protocols.
3 - View DTCs and their defi nitions on screen. Press ENTER button to return to previous
screen.