Part List - Cembre CPP-0 Notice D'utilisation Et Entretien

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

ENGLISH
2. INSTRUCTIONS FOR USE
2.1) Setting
Place the pump on a flat surface so as to rest the whole base on the ground.
This position will give the necessary stability during the operation.
The ambient working temperature must not exceed 50 C° (120° F).
The working environment must be free from corrosive chemicals, oils and greases.
Before operating the pump ensure that the air pressure is 7 bar: absolutely do not use the pump if
the air pressure exceeds 8 bar (115 psi).
2.2) Operation
(Ref. to Fig. 3 a-b-c)
Press the pedal (06) on "PUMP" side to commence the build up of pressure.
Continue pumping until completion of the operation (dies closing in case of compression head;
full cable cut in case of cutting head; etc).
Note: for crimping heads, it is recommended to continue pumping until the maximum pressure
valve is actived and a repetitive "click" is heard.
To release oil pressure in the pump circuit (and therefore reset the head or blade in the rest posi-
tion) depress pedal on "RELEASE" side. To halt the operation at any stage, or to stop the pump and
maintain the oil pressure, release pedal (06).
2.3) Storage
After the completion of the work, release the oil pressure and disconnect the air supply.
Coil the hose around the casing and cover the pump, to protect from dust. Store the pump in a
clean, dry enviroment.

3. PART LIST

(Ref. to Fig. 6)
Code N° Item
6019029
01
OIL INLET VALVE
6160115
02
PUMP BODY
6019030
03
PRESSURE RELEASE VALVE
6800066
04
OIL FILLER PLUG
6550051
06
FOOT PEDAL
6631120
07
GUARD
6019035
08
PIVOT PIN
6019031
09
COVER PLATE
The guarantee is void if parts used are not CEMBRE original spares.
When ordering spare parts always specify the following:
- code number of item
- name of item
- type of pump
- pump serial number
4. RETURN TO CEMBRE FOR OVERHAUL
In the case of a breakdown contact our Area Agent who will advise you on the problem and give
you the necessary instructions on how to dispatch the tool to our nearest service Centre; if possible,
attach a copy of the Test Certificate supplied by CEMBRE together with the tool or fill in and attach
the form available in the "ASSISTANCE" section of the CEMBRE website.
DESCRIPTION
Qty
Code N° Item
1
6019028
10
1
6019032
11
1
6650090
12
1
6019025
13
1
6720090
14
1
6650052
15
1
6019027
16
1
6019033
17
DESCRIPTION
AIR INLET VALVE
HEAD
COUPLER
ANTI-RETURN VALVE
RESERVOIR
AIR COUPLER
MAX PRESSURE VALVE
CYLINDER
4
Qty
1
1
1
1
1
1
1
1

Publicité

Table des Matières
loading

Table des Matières