Oven Racks - hestan KRG Serie Mode D'emploi

Masquer les pouces Voir aussi pour KRG Serie:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

GETTING STARTED WITH YOUR APPLIANCE

OVEN RACKS

OVEN RACKS
BURN HAZARD - To help prevent burns, never remove or reposition the oven racks when the oven is
in operation, or is cooling.
For safety considerations, NEVER cover any slots, holes, or passages in the oven bottom or cover an
entire oven rack with materials such as aluminum foil. Doing so blocks air flow through the oven
and may cause carbon monoxide poisoning. Aluminum foil linings may also trap heat, causing a fire
hazard.
PLACING THE OVEN RACKS
PLACING THE OVEN RACKS
The oven features ladder racks on the left and right side of the oven with 6 positions. Choose
the rack position(s) that result in the best baking, roasting, etc. for your recipe. Rack position #3
(counting from the bottom-up) is the most popular position (vertical center location).
1. While raising the front of the rack slightly,
place the rear lower hooks under the
desired side ladder, then slide the rack
back approximately 5" [13 cm].
2. Lower the rack until it is level.
3. Continue sliding the rack back into the
oven until it is fully inside.
1
2
3
©2020 Hestan Commercial Corporation
(CONTINUED)
13
EN

Publicité

Chapitres

Table des Matières
loading

Table des Matières