EGO CS1800 Guide D'utilisation page 38

NOTICE:
This is a good time to inspect
the drive sprocket for excessive wear or
damage.
Assembling the New Bar and
Chain
1. Lay the new saw chain in a loop on
a flat surface and straighten any
kinks (Fig. 27).
2. Place the chain drive links into the guide bar groove. Position the chain so there is
a loop at the back of the guide bar (Fig. 28).
3. Hold the chain in position on the
guide bar and place the loop around
the drive sprocket of the power
head.
38
56V LITHIUM-ION CORDLESS CHAIN SAW — CS1800/CS1800-FC
27
Chain Cutter
Chain Drive Links
28
Chain Drive
Links
Guide Bar Groove
Rotation Direction