Led Headlights - EGO CS1800 Guide D'utilisation

Rear Handle
The support handle for the right hand, located at the rear of the chain saw. Always
hold the chain saw with your right hand on the rear handle and your left hand
on the front handle.
Quick Chain-tension Adjust Knob
Permits quick precise adjustment of chain tension without auxiliary device assistance.
Side Cover
Covers the drive sprocket and secures the guide bar.
Battery-Release Button
Press to release the battery pack from the tool.
Ejection Mechanism
Aids in removing the battery.

LED Headlights

The LED headlights are located in the front of the chain saw power head.
This feature provides extra light for increased visibility and it can be adjusted into 2
brightness.
LED Button
Switch ON or OFF of the LED headlights. Press once on the LED button and the
headlights shine with Level 1 brightness. Press the LED button again, and the lights will
shine more brightly: Level 2. The LED headlights will be turned off after pressing the
button a third time.
Bucking Spikes
The pointed metal teeth for use when felling or bucking to pivot the chain saw and
maintain position, preventing lumber sliding while sawing. It can improve the cutting
efficiency.
21
56V LITHIUM-ION CORDLESS CHAIN SAW — CS1800/CS1800-FC