Assembly Instructions; General Components & Features; Additional Requirements; Step 1 Attach Legs To Base - Endless Summer 233010 Manuel D'utilisation

Contact 1-800-762-1142 for assistance.
Do not return to place of purchase.

Assembly Instructions

General Components & Features
Familiarize yourself with all components before proceeding. Refer to page 5 for hardware and components, and page 21
for specifications.
The white ceramic cone in the top of the engine is an important piece. DO NOT REMOVE.
Do NOT attempt assembly unless all components are available. If you believe a component is missing or damaged,
contact 1-800-762-1142 for assistance.
Note: All hardware is mounted on a cardboard pack and numbered to match their assembly step.

Additional Requirements

The following items are not included, but are necessary for the proper assembly of your heater. Do NOT attempt to
assemble without proper tools.
(1) 9 mm Wrench
(1) 11 mm Wrench
(1) 13 mm Wrench
(1) 14 mm Wrench
(1) 13 mm Socket Wrench
(1) #2 Phillips Head Screwdriver
(1) Leak Detection Solution (Instructions on how to make solution are included in step 15)
Note: You must follow all steps to properly assemble heater.
Step 1 – Attach Legs to Base
Secure Legs to Base using (2) Large Bolts, (2) Small lock washers and
(2) Small nuts per leg. Finger tighten only.
Do not fully tighten until Step 2.
Owner's manual: model 233010 outdoor patio heater 6/8/04
®
6