Microsd Card Installation - D-Link DCS-6517 Guide D'installation

microSD Card Installation

Remove the sun shield by lifting it off of the camera.
Use the included security wrench to remove the 4
screws from the top of the camera, then remove the
camera cover.
Insert the microSD card with the gold contacts facing
the outside of the camera. To eject the microSD card,
push the card into the slot.
Reattach the camera cover using the security wrench
to tighten the 4 screws, and reattach the sun shield.
Mounting the Camera on the Ceiling
Locate a suitable position on the ceiling that is capable
Drill hole
of supporting the weight of the camera. Attach the
alignment sticker to the ceiling or wall.
Wire hole
Drill hole Drill hole
Ceiling
Align the mounting plate to the drilled holes in the
ceiling surface then tighten the screws.
Align the camera to the mounting plate and screw the
camera body to the plate tightly.
Adjusting the Camera's Lens
Adjust the Camera's Lens gimbal; Turn the lens module left and right, up and down
and the orientation until the desired position is achieved. Tighten the pan, tile and
the adjustment screw once completed.
5
D-Link DCS-6517 Quick Installation Guide