Hardware Installation - D-Link DCS-6915 Guide D'installation

Hardware Installation

STEP 1
Unpack the dCS-6915 and remove the dome camera unit.
STEP 2
remove the protective cover and pe sheet.
STEP 3
apply some lubricant on the cover's waterproof seal to make
the installation process smoother. attach the optical cover to the
camera body.
the small protrusions on the cover must align with the four holes
on the camera body.
STEP 4
Gently press down the dome cover with two hands on the side of it.
Warning: do Not press down on the optical cover. this might
cause damage to the camera.
STEP 5
Screw the dome cover and body together.
5