Operation; Maintenance - Omcan Santos 38 Instructions

USING:
Caution: the fruits used must be washed carefully before being pressed.
Assembly and preparation:
• Place the trim (3) on the bowl (2) {models no. 38}.
• Place the bowl (2) on the base (4).
• Place the pulp grating (9) in the bowl.
• Place the cone (1) on the motor shaft (5).
• Place the anti-splash dome (8) on the bowl (2) {model no 52}.
• Cut the citrus fruit in two halves.
• Place a glass level with the spout on the bowl (2).
• Start the appliance by putting the On / Off switch (6) on "1".
• Press the citrus fruit halves one after the other.
• When you have finished using it, stop the appliance by putting the On / Off switch(6) on "0".
CLEANING
IMPORTANT:
• In every case, stop the appliance and unplug the appliance's power cord(7).
• It is recommended to clean the appliance as soon as you have finished using it.
• Cleaning will be easier if you do not wait until the pulp has dried in the bowl (2), on the anti-splash dome
(8), the cone (1) or the pulp grating (9).
• The base (4) is to be cleaned with a soft damp sponge, then dried.

MAINTENANCE:

1. Before any servicing of the appliance, it is essential to unplug the appliance from the mains supply (7).
2. This machine requires no particular maintenance because the bearings are lubricated for life.
3. If servicing is necessary to replace any parts such as the electrical components or any others, refer to the
list of components (see the exploded view).
IMPORTANT:
Use of spare parts other than certified original parts is prohibited. For all spare part orders (see references in
the exploded view), state:
• The type.
• The machine serial number.
• The electrical specifications (16) recorded under the machine.
Maintenance
7

Operation